Введение
NEC Chapter 9 limits how many conductors can be installed in a conduit. Proper conduit fill ensures heat dissipation and allows for wire pulling during installation.
NEC Conduit Fill Limits
Maximum fill percentages based on number of conductors:
- 1 conductor: 53% maximum fill
- 2 conductors: 31% maximum fill
- 3+ conductors: 40% maximum fill
- These limits apply to all conduit types
Conduit Types and Sizes
Common conduit types have different internal areas:
- EMT (Electrical Metallic Tubing)
- IMC (Intermediate Metal Conduit)
- RMC (Rigid Metal Conduit)
Calculating Conduit Fill
Follow these steps for proper conduit fill calculation.
Совет
1. Find wire area from NEC Chapter 9 Table 5. 2. Sum all conductor areas. 3. Compare to conduit internal area × fill percentage.
Wire Area Reference
Common wire areas for THHN/THWN conductors:
- 14 AWG: 0.0097 sq in
- 12 AWG: 0.0133 sq in
- 10 AWG: 0.0211 sq in
- 8 AWG: 0.0366 sq in
Common Conduit Sizes
Standard conduit sizes and their typical applications.
Важно
Exceeding conduit fill limits can damage wire insulation and make installation difficult. Always verify calculations before installation.
Заключение
Proper conduit fill calculation ensures safe, code-compliant installations. Use our calculator for quick, accurate conduit sizing.
Используйте наш Калькулятор сечения провода для точных результатов.